Free. Instant. No signup. Pulls recalls and complaints for your exact vehicle.

Couldn't find that VIN. Check the digits and try again.

2005 Chrysler Crossfire powertrain problems

moderate 6 complaints filed with NHTSA · avg repair $2,500 · see powertrain across all vehicles →

Complaints
6
Recalls
0
Avg fix
$2,500

When does it fail?

Of the 6 powertrain complaints filed for the 2005 Chrysler Crossfire, here's the actual mileage breakdown — failures cluster heaviest at 0-25,000 mi.

0-25k
1 (100%)
25-50k
0 (0%)
50-75k
0 (0%)
75-100k
0 (0%)
100-125k
0 (0%)
125-150k
0 (0%)
150k+
0 (0%)

Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted. Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits and driving conditions shift the curve as much as mileage alone.

What stands out

No new NHTSA powertrain complaint has been filed on this vehicle in over 20 years — the issue may be aging out of the active population.

Is there a fix? Manufacturer service bulletins

The manufacturer has issued service bulletins covering powertrain on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.

Service Bulletin 9004009 Apr 2021

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins

full bulletin at NHTSA ↗
Service Bulletin 9004009 Mar 2021

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins

full bulletin at NHTSA ↗
Service Bulletin S2008000168 Oct 2020

Convertible Switch Lamp Flashes When Attempting To Operate The Power Convertible Top, Convertible Top Does Not Operate to Open

full bulletin at NHTSA ↗

Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.

What owners are reporting 1 most recent

powertrain · 1,000 mi · filed 12/09/2005

On this date a second transmission failure was in progress where the transmission would not shift properly into gear. This incident happened on a trip to see a relative in poor health and along with defective wheel bolts that caused the passenger front wheel to become separated from the vehicle, left me stranded. This was not the first time the transmission had been giving me troubles and has…

Had powertrain trouble with your 2005 Chrysler Crossfire? File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.

Common questions

How serious is the powertrain problem on the 2005 Chrysler Crossfire?

It's a documented issue but not catastrophic. 6 complaints have been filed. Repairs average $2,500 and most owners catch it before it causes a breakdown.

At what mileage does the powertrain typically fail?

Based on the 6 complaints filed, powertrain issues most often appear around 28,309 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.

What does it cost to fix?

Independent shops typically charge around $2,500 for powertrain repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.

Are there any recalls related to powertrain?

No active recalls currently cover powertrain issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.

Related

Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA) public records database. Verify the raw federal record at nhtsa.gov/vehicle/2005/Chrysler/Crossfire. Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are independent-shop national averages and may differ in your area. Some links on this page are affiliate links.
Get a free warranty quote →
Sponsored — we earn a commission if you complete a quote. Disclosure.