Free. Instant. No signup. Pulls recalls and complaints for your exact vehicle.

Couldn't find that VIN. Check the digits and try again.

2009 Mazda Mazda3 lighting problems

severe Owners of the 2009 Mazda Mazda3 have filed 4 NHTSA complaints about the lighting at roughly $250 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See lighting across all vehicles →

Complaints
4
Recalls
0
Avg fix
$250
lighting complaints on the Mazda Mazda3, by model year
Model yearlighting complaints
2005 Mazda3 4
2007 Mazda3 9
2008 Mazda3 10
2009 Mazda3 (this page) 4
2010 Mazda3 18
2011 Mazda3 7
2012 Mazda3 18
2013 Mazda3 22
1fire

When does it fail?

Of the 4 lighting complaints filed for the 2009 Mazda Mazda3, here's the actual mileage breakdown — failures cluster heaviest at 25,000-50,000 mi.

0-25k
0 (0%)
25-50k
1 (100%)
50-75k
0 (0%)
75-100k
0 (0%)
100-125k
0 (0%)
125-150k
0 (0%)
150k+
0 (0%)

Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted. Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits and driving conditions shift the curve as much as mileage alone.

What stands out

No new NHTSA lighting complaint has been filed on this vehicle in over 11 years — the issue may be aging out of the active population.

Is there a fix? Manufacturer service bulletins

The manufacturer has issued service bulletins covering lighting on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.

Service Bulletin 09-003-19-3555a Mar 2019

Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will t

full bulletin at NHTSA ↗
Service Bulletin 09-003-19-3555 Jan 2019

Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will t

full bulletin at NHTSA ↗
Service Bulletin 09-011-18-3448 Mar 2018

Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear incertain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will ty

full bulletin at NHTSA ↗
Service Bulletin 09-001-17-3296b Aug 2017

When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy.

full bulletin at NHTSA ↗
Service Bulletin MT-013-17 Jul 2017

On some vehicles, the rear combination lamp lens becomes hazy and looks white when the brake or taillight is on. Due to heat accumulated by extended brake light (E) usage, the red inner cap (A) is melted (B) and the inner (C) and/or outer (D) lens becomes hazy.

full bulletin at NHTSA ↗

Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.

What owners are reporting 1 most recent

lighting · 45,000 mi · filed 12/08/2014

Tl* the contact owns a 2009 Mazda 3. The contact stated that the tail lights melted. The dealer replaced the tail lights; however, the failure persisted. In addition, the brake lights operated at random. The manufacturer was notified of the failure. The approximate failure mileage was 45,000.

Had lighting trouble with your 2009 Mazda Mazda3? File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.

Common questions

How serious is the lighting problem on the 2009 Mazda Mazda3?

It's a meaningful issue. 4 complaints have been filed and the failure mode causes operational problems for owners. Repairs average $250.

At what mileage does the lighting typically fail?

Based on the 4 complaints filed, lighting issues most often appear around 56,350 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.

What does it cost to fix?

Independent shops typically charge around $250 for lighting repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.

Are there any recalls related to lighting?

No active recalls currently cover lighting issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.

Related

Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA) public records database. Verify the raw federal record at nhtsa.gov/vehicle/2009/Mazda/Mazda3. Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are independent-shop national averages and may differ in your area. Some links on this page are affiliate links.
Sponsored
Get a free warranty quote →