Free. Instant. No signup. Pulls recalls and complaints for your exact vehicle.

Couldn't find that VIN. Check the digits and try again.

2010 Ford Mustang engine problems

moderate Owners of the 2010 Ford Mustang have filed 6 NHTSA complaints about the engine at roughly $3,100 to repair (U.S. federal records, as of August 2026). Source: NHTSA Office of Defects Investigation. See engine across all vehicles →

Complaints
6
Recalls
0
Avg fix
$3,100
engine complaints on the Ford Mustang, by model year
Model yearengine complaints
2006 Mustang 27
2007 Mustang 8
2008 Mustang 5
2010 Mustang (this page) 6
2011 Mustang 26
2012 Mustang 10
2013 Mustang 9
2014 Mustang 8

Is there a fix? Manufacturer service bulletins

The manufacturer has issued service bulletins covering engine on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.

Service Bulletin SSM 47797 Feb 2019

Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the se

full bulletin at NHTSA ↗
Service Bulletin SSM 47331 Jun 2018

Various vehicles equipped with a 4.6L, 5.4L, 6.8L modular 3 valve engine built on or before 8-Jan-2016 may exhibit symptoms that may include upper end engine noise, rough running, misfire and/or engine damage. If diagnosis leads to only camshaft/camshaft roller follower(s) requiring replacement, replace all of the camshaft roller followers on both banks/cylinder heads with part number 3L3Z-6564-A, not just the faulty roller follower(s). When replacing the camshaft roller followers, refer to Workshop Manual (WSM), Section 303-01.

full bulletin at NHTSA ↗
Service Bulletin SSM 46085 Sep 2016

The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.

full bulletin at NHTSA ↗
Service Bulletin SB-32167-70 Apr 2013

FORD/LINCOLN/MERCURY: SOME VEHICLES MAY EXPERIENCE AN ILLUMINATED MIL OR SAFETY STOP NOW MESSAGE, OR A NO START CONDITION OR POSSIBLE MISFIRE OR ROUGHNESS AT IDLING THROUGH 2000RPM OR A LACK OF ACCELERATION. MODELS 2009-12 ESCAPE, 2009-11 MARINER, MILAN, 2010-12 FUSION, 2011-14 MUSTANGS, 2013 C-MAX, FUSION, MKZ HYBRID.

full bulletin at NHTSA ↗
Service Bulletin AS-21769 Mar 2011

FORD: IF THERE IS AN INTERMITTENT LACK OF POWER, SURGE, OR HESITATION WHILE DRIVING THE BRAKES WILL OVERRIDE ACCELERATION.

full bulletin at NHTSA ↗

Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.

What owners are reporting 0 most recent

Had engine trouble with your 2010 Ford Mustang? File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.

Common questions

How serious is the engine problem on the 2010 Ford Mustang?

It's a documented issue but not catastrophic. 6 complaints have been filed. Repairs average $3,100 and most owners catch it before it causes a breakdown.

At what mileage does the engine typically fail?

Based on the 6 complaints filed, engine issues most often appear around 57,806 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.

What does it cost to fix?

Independent shops typically charge around $3,100 for engine repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.

Are there any recalls related to engine?

No active recalls currently cover engine issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.

Related

Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA) public records database. Verify the raw federal record at nhtsa.gov/vehicle/2010/Ford/Mustang. Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are independent-shop national averages and may differ in your area. Some links on this page are affiliate links.
Sponsored
Get a free warranty quote →