This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
full bulletin at NHTSA ↗2010 GMC Sierra brakes problems
moderate Owners of the 2010 GMC Sierra have filed 4 NHTSA complaints about the brakes at roughly $450 to repair (U.S. federal records, as of August 2026). Source: NHTSA Office of Defects Investigation. See brakes across all vehicles →
| Model year | brakes complaints |
|---|---|
| 2006 Sierra | 112 |
| 2007 Sierra | 44 |
| 2008 Sierra | 11 |
| 2009 Sierra | 4 |
| 2010 Sierra (this page) | 4 |
| 2011 Sierra | 4 |
| 2013 Sierra | 5 |
| 2014 Sierra | 118 |
No new NHTSA brakes complaint has been filed on this vehicle in over 15 years — the issue may be aging out of the active population.
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering brakes on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
This Preliminary Information communication provides the technician with the additional steps that are needed to help perform a successful brake bleed on the 2-Mode Hybrid with Regular Production Option Code HP2. With a battery maintainer installed on the vehicle use brake pressure bleeder that maintains 30 psi for the entire bleed procedure.
full bulletin at NHTSA ↗This informational bulletin provides technicians with a brake lathe calibration procedure.
full bulletin at NHTSA ↗This warranty administration bulletin provide policy information on a revised customer concern not duplicated/verified labor operation numbers and how to submit CCND.
full bulletin at NHTSA ↗This Preliminary Information communication advises the technician that the Electronic Brake Control Module and Brake Pressure Modulator Valve for the 2-Mode Hybrid Utilities and Trucks will be placed on a parts restriction through the General Motors Technical Assistance Center. Dealer will need to contact for further assistance.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 1 most recent
Tl* the contact owns a 2010 GMC sierra hybrid (na). The contact stated that the brakes grabbed when the vehicle was coming to a stop, which made the vehicle come to an abrupt jerking stop. The contact also stated that when slowing down from higher speeds, he had to depress the brake pedal with extreme force. The dealer gave the contact a memo from the manufacturer to pump the brakes on the…
Common questions
How serious is the brakes problem on the 2010 GMC Sierra?
It's a documented issue but not catastrophic. 4 complaints have been filed. Repairs average $450 and most owners catch it before it causes a breakdown.
At what mileage does the brakes typically fail?
Based on the 4 complaints filed, brakes issues most often appear around 65,000 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $450 for brakes repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to brakes?
No active recalls currently cover brakes issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.