Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins
full bulletin at NHTSA ↗2010 Jeep Compass powertrain problems
severe Owners of the 2010 Jeep Compass have filed 5 NHTSA complaints about the powertrain at roughly $2,500 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See powertrain across all vehicles →
| Model year | powertrain complaints |
|---|---|
| 2007 Compass | 32 |
| 2008 Compass | 13 |
| 2009 Compass | 8 |
| 2010 Compass (this page) | 5 |
| 2011 Compass | 31 |
| 2012 Compass | 26 |
| 2013 Compass | 25 |
| 2014 Compass | 30 |
When does it fail?
Of the 5 powertrain complaints filed for the 2010 Jeep Compass, here's the actual mileage breakdown — failures cluster heaviest at 0-25,000 mi.
Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted. Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits and driving conditions shift the curve as much as mileage alone.
Of the 18 model years of Jeep Compass we track for powertrain problems, this one has the fewest owner complaints on file (5).
No new NHTSA powertrain complaint has been filed on this vehicle in over 14 years — the issue may be aging out of the active population.
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering powertrain on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
TRANSMISSION, 5 Speed Replacing OE transmission 05106789A$/68042789A$ with reman transmission R8142073A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever
full bulletin at NHTSA ↗TRANSMISSION, 5 Speed On replacing OE transmission 05106567A$/68042567A$ with reman transmission R8142074A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever
full bulletin at NHTSA ↗TRANSMISSION, 5 Speed Replacing OE transmission 05106789A$/68042789A$ with reman transmission R8142073A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever
full bulletin at NHTSA ↗TRANSMISSION, 5 Speed On replacing OE transmission 05106567A$/68042567A$ with reman transmission R8142074A$ replace with new Hydraulic Clutch Tube 05273429A$ to avoid interference with shift lever
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 2 most recent
The transmission control module stopped working. After trying to turn the car on. It would only move in 1st gear and in reverse. It happened a second time less then 6 months later. The car shifted into drive and the entire car jerked and made a popping sound. And would again only work in 1st and reverse. The 3rd I was driving on the interstate. As I got on the off ramp the car beeped like it…
Manual transmission car was revving high after shifting gears. Rpms were approximately 4000 once shifted into second gear going 20 MPH. Called dealership to schedule an appointment for the following week. The next day in the highway the car had no power. Would only be able to go 40mph in a 65 in 5th gear. It was a 20 minute drive to work. On the way home on the highway, the same issue with lack…
Common questions
How serious is the powertrain problem on the 2010 Jeep Compass?
It's a meaningful issue. 5 complaints have been filed and the failure mode causes operational problems for owners. Repairs average $2,500.
At what mileage does the powertrain typically fail?
Based on the 5 complaints filed, powertrain issues most often appear around 65,116 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $2,500 for powertrain repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to powertrain?
No active recalls currently cover powertrain issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.