Of the 3 brakes complaints filed for the 2012 Subaru Legacy,
here's the actual mileage breakdown — failures cluster heaviest at 50,000-75,000 mi.
0-25k
0 (0%)
25-50k
0 (0%)
50-75k
1 (100%)
75-100k
0 (0%)
100-125k
0 (0%)
125-150k
0 (0%)
150k+
0 (0%)
Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted.
Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits
and driving conditions shift the curve as much as mileage alone.
What stands out
Of the 9 model years of Subaru Legacy we track for brakes problems, this one has the fewest owner complaints on file (3).
No new NHTSA brakes complaint has been filed on this vehicle in over 7 years — the issue may be aging out of the active population.
Subaru is recalling certain model year 2012 impreza sedans and wagons (except wrx/sti models), manufactured from april 21, 2011, through november 15, 2011, and legacy and outback vehicles manufactured from october 17, 2011, through november 23, 2011
The driver might misjudge the amount of brake pedal travel required to achieve the desired stopping distance. This could occur unexpectedly and without prior warning, increasing the risk of a crash.
Fix: Subaru will notify owners, and dealers will inspect the brake master cylinder and if necessary, replace it, free of charge. The safety recall is expected to begin during december 2011. Owners may contact Subaru at 1-800-782-2783.
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering brakes on this vehicle — documented
repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall
(it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Service Bulletin06-90-24Jun 2024
This bulletin provides diagnosis and procedure information to be applied when diagnosing potential fluid leaks on front and rear brake calipers. This information has been developed to reduce unnecessary brake caliper replacement.
This bulletin announces availability of a new front disc brake pad, shim, grease and clip kit designed to reduce customer concerns of excessive brake squeal. This new kit eliminates the âslottedâ shim which previously was installed between the rubber-coated outer shim and the brake pad.
This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the brake pad installation procedures found in the related Service Manuals.
This bulletin announces a design change to the front brake caliper supports to address customer concerns of a rattling sound heard while driving. The change involves a reduction in the amount of clearance between the caliper support mounting bolt holes and the mounting bolts. NOTE: This information is applicable to models using 16? front brakes ONLY.
This bulletin announces a design change to the front brake caliper supports to address customer concerns of a rattling sound heard while driving. The change involves a reduction in the amount of clearance between the caliper support mounting bolt holes and the mounting bolts. NOTE: This information is applicable to models using 16? front brakes ONLY.
Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting
1 most recent
brakes · 62,000 mi
· filed 10/10/2018
Brake pedal travel suddenly increased while driving on residential street. Brake pedal must be depressed almost to floor for car to begin braking. Braking is not very effective. No brake fluid loss experienced and brake fluid appears clear. Fluid level near maximum level in reservoir. A recall (11v562000) for similar issue on certain 2012 legacy was issued but my VIN does not indicate a…
Had brakes trouble with your 2012 Subaru Legacy?
File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.
Common questions
How serious is the brakes problem on the 2012 Subaru Legacy?
It's a documented issue but not catastrophic. 3 complaints have been filed. Repairs average $450 and most owners catch it before it causes a breakdown.
At what mileage does the brakes typically fail?
Based on the 3 complaints filed, brakes issues most often appear around 74,500 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $450 for brakes repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to brakes?
Yes — 1 active recall(s) cover brakes issues on this vehicle. Recall fixes are always free regardless of mileage or warranty status. Use the VIN decoder at the top of the page to check if your specific vehicle is affected.
Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA)
public records database. Verify the raw federal record at
nhtsa.gov/vehicle/2012/Subaru/Legacy.
Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are
independent-shop national averages and may differ in your area. Some links on this page are affiliate links.