Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
full bulletin at NHTSA ↗2016 Chrysler 300 body problems
moderate Owners of the 2016 Chrysler 300 have filed 8 NHTSA complaints about the body at roughly $1,500 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See body across all vehicles →
Complaints
8
Recalls
0
Avg fix
$1,500
| Model year | body complaints |
|---|---|
| 2012 300 | 5 |
| 2015 300 | 3 |
| 2016 300 (this page) | 8 |
| 2017 300 | 11 |
When does it fail?
Of the 8 body complaints filed for the 2016 Chrysler 300, here's the actual mileage breakdown — failures cluster heaviest at 50,000-75,000 mi.
0-25k
25-50k
50-75k
75-100k
100-125k
125-150k
150k+
Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted. Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits and driving conditions shift the curve as much as mileage alone.
What stands out
No new NHTSA body complaint has been filed on this vehicle in over 4 years — the issue may be aging out of the active population.
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering body on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
full bulletin at NHTSA ↗Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
full bulletin at NHTSA ↗"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
full bulletin at NHTSA ↗Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 1 most recent
The contact owns a 2016 Chrysler 300. The contact stated while the vehicle parked, she noticed that the interior door was separating from the door frame showing the padding on the front and rear driver’s and passenger’s side doors. The contact took the vehicle to a local dealer to have the vehicle inspected. The contact was informed that the sun or the heat had warped the parts connected to the…
Had body trouble with your 2016 Chrysler 300?
File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.
Common questions
How serious is the body problem on the 2016 Chrysler 300?
It's a documented issue but not catastrophic. 8 complaints have been filed. Repairs average $1,500 and most owners catch it before it causes a breakdown.
At what mileage does the body typically fail?
Based on the 8 complaints filed, body issues most often appear around 31,929 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $1,500 for body repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to body?
No active recalls currently cover body issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.
Related
Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA)
public records database. Verify the raw federal record at
nhtsa.gov/vehicle/2016/Chrysler/300.
Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are
independent-shop national averages and may differ in your area. Some links on this page are affiliate links.