Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
full bulletin at NHTSA ↗2019 Ford Escape brakes problems
severe Owners of the 2019 Ford Escape have filed 6 NHTSA complaints about the brakes at roughly $450 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See brakes across all vehicles →
| Model year | brakes complaints |
|---|---|
| 2015 Escape | 16 |
| 2016 Escape | 14 |
| 2017 Escape | 35 |
| 2018 Escape | 18 |
| 2019 Escape (this page) | 6 |
| 2020 Escape | 21 |
| 2021 Escape | 36 |
| 2022 Escape | 27 |
| 2023 Escape | 3 |
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering brakes on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
full bulletin at NHTSA ↗Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 0 most recent
Common questions
How serious is the brakes problem on the 2019 Ford Escape?
It's a meaningful issue. 6 complaints have been filed and the failure mode causes operational problems for owners. Repairs average $450.
At what mileage does the brakes typically fail?
Based on the 6 complaints filed, brakes issues most often appear around 12,356 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $450 for brakes repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to brakes?
No active recalls currently cover brakes issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.