Some vehicles may exhibit a light resistance and/or an unusual noise when turning the steering wheel in either direction. This concern may be caused by insufficient lubrication between the worm wheel gear and worm shaft. To eliminate this concern, the amount of grease between the worm wheel gear and worm shaft was increased and the housing end cover shape was modified.
full bulletin at NHTSA ↗2021 Mazda CX-3 steering problems
moderate Owners of the 2021 Mazda CX-3 have filed 3 NHTSA complaints about the steering at roughly $700 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See steering across all vehicles →
Complaints
3
Recalls
0
Avg fix
$700
| Model year | steering complaints |
|---|---|
| 2019 CX-3 | 5 |
| 2021 CX-3 (this page) | 3 |
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering steering on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Noise, Vibration, and Harshness (NVH) Diagnostic Guidelines Diagnostic Guidelines When diagnosing NVH concerns, it is essential to first classify the issue into one of three primary categories: Noise, Vibration, or Harshness. Many customer complaints may involve overlapping symptoms, such as both noise and vibration, so identifying the dominant characteristic is critical. Once the primary symptom is determined, follow the appropriate diagnostic path. For example, if a concern includes both noise and vibration but is related to vehicle speed, the vibration diagnostic path should be followed. When considering component replacement during the diagnostic process, it is best practice to start wit
full bulletin at NHTSA ↗Some vehicles may exhibit wear/peel-off of the leather steering wheel surface causing a poor appearance. This concern may be caused by an insufficient wear resistance of the steering wheel surface.
full bulletin at NHTSA ↗Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
full bulletin at NHTSA ↗Some vehicles may exhibit a light resistance and/or an unusual noise when turning the steering wheel in either direction. This concern may be caused by insufficient lubrication between the worm wheel gear and worm shaft. To eliminate this concern, the production process for the steering shaft has been modified.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 3 most recent
All of the issues listed in Mazda Technical Service Bulletin 06-001/20, however this bulletin does not cover my model. Inspected by dealer, possible solution intended to be relubrication of the worm gear/worm shaft in the steering assembly. Issue presented itself in the last year and is most present while driving at high speeds, above 45 miles an hour.
The Mazda CX-30 2021 I purchased from Mastria Mazda in Raynham, Massachusetts has a steering problem that is a significant safety concern. The steering wheel has resistance that can most notably be felt at highway speeds (around 65 mph). When making small corrections to the steering wheel to stay in the lane the steering binds and then releases with further force ultimately resulting in…
Having the exact same issue as was outlined and allegedly repaired in the prior service bulletin 06-001/20. Obviously this bulletin only applies to vehicles up to model year 2020. I have checked the model number on the steering motor to determine that it is the "updated" design. Obviously, the issue has not been addressed properly by Mazda.
Had steering trouble with your 2021 Mazda CX-3?
File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.
Common questions
How serious is the steering problem on the 2021 Mazda CX-3?
It's a documented issue but not catastrophic. 3 complaints have been filed. Repairs average $700 and most owners catch it before it causes a breakdown.
At what mileage does the steering typically fail?
Mileage data is limited for this issue. Owners report failures across a wide range, suggesting cause is more about driving conditions and maintenance than mileage alone.
What does it cost to fix?
Independent shops typically charge around $700 for steering repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to steering?
No active recalls currently cover steering issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.
Related
Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA)
public records database. Verify the raw federal record at
nhtsa.gov/vehicle/2021/Mazda/CX-3.
Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are
independent-shop national averages and may differ in your area. Some links on this page are affiliate links.