DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on One Mazda. To obtain a replacement vehicle certification label (located on the Bpillar or front door), contact your assigned DSM (District Service Manager) to place the order. If DSM contact information is not available, refer to the Dealer & Field Contact Directory.
full bulletin at NHTSA ↗2024 Mazda CX-50 body problems
severe Owners of the 2024 Mazda CX-50 have filed 5 NHTSA complaints about the body at roughly $1,500 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See body across all vehicles →
Complaints
5
Recalls
0
Avg fix
$1,500
| Model year | body complaints |
|---|---|
| 2023 CX-50 | 4 |
| 2024 CX-50 (this page) | 5 |
| 2025 CX-50 | 3 |
2injuries
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering body on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
This Service Alert supersedes the previously issued SAs and bulletin(s) listed below: The changes are noted below in red. SA-010/23 02/09/23 DESCRIPTION Some customers may experience one or more electrical malfunctions after a vehicle body repair. A newly painted fender stay (2) may be causing a poor front harness (1) ground connection. The front fender stay (2) newly painted surface at ground point (3), where attachment bolt (4) is seated, may create a poor front harness ground connection. NOTE: DO NOT paint ground point (3) attachment bolt (4) is seated. NEWLY INSTALLED FRONT FENDER STAY NOTE: CAUTION: If the bolt (4) contact area (3) is painted when the front fender stay (2) is newly repl
full bulletin at NHTSA ↗Some customers may complain that a door beltline molding is loose, fell off, or is missing.
full bulletin at NHTSA ↗Some customers may experience that the fuel lid and charge lid do not lock or unlock during door lock/unlock operation. This is caused by: Improper dimensional accuracy of the lid actuator lock mechanism Incomplete control logic in the R-ESU software To eliminate this concern: The mold design of the lid actuator was modified. The control software of the R-ESU was revised.
full bulletin at NHTSA ↗Some customers may complain about a rattle from the sunroof (panorama roof) area. Make sure to read the complete repair procedure before attempting any repairs as the sunroof may have rattles from more than one location. The rattle noise may be caused by: Looseness in the side cover fitting part 1. Looseness in the cross brace cover clip 2. Looseness in the movable part inside the sunroof unit 3. To eliminate this concern, the following changes have been implemented. CAUSE 1: The shape of the side cover and clips have been modified to reduce the movement causing the rattle noise CAUSE 2: Improvement of the assembly process CAUSE 3: Modification of dimensions of the moving parts
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 4 most recent
The vehicle hood has an angled section near the windshield that causes sunlight to beam intensely, directly into the drivers eyes when driving with the sun in front of the vehicle.
Window shattered while idle.
Water leaking to right rear cargo area after rain that makes the roof trim wet, the cargo floor and spare tire compartment flooded. The water seems to flow out from seat belt opening.
The contact owns a 2024 Mazda CX-50. The contact stated that while opening the doors, the door stop detent had failed, causing the door to rapidly close and swing back, and making contact with the occupants. Both the contact and the wife sustained leg bruises, and the wife sustained a head contusion due to the failure. No medical treatment was required. The contact indicated that the failure was…
Had body trouble with your 2024 Mazda CX-50?
File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.
Common questions
How serious is the body problem on the 2024 Mazda CX-50?
It's a meaningful issue. 5 complaints have been filed and the failure mode causes operational problems for owners. Repairs average $1,500.
At what mileage does the body typically fail?
Mileage data is limited for this issue. Owners report failures across a wide range, suggesting cause is more about driving conditions and maintenance than mileage alone.
What does it cost to fix?
Independent shops typically charge around $1,500 for body repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to body?
No active recalls currently cover body issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.
Related
Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA)
public records database. Verify the raw federal record at
nhtsa.gov/vehicle/2024/Mazda/CX-50.
Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are
independent-shop national averages and may differ in your area. Some links on this page are affiliate links.