Free. Instant. No signup. Pulls recalls and complaints for your exact vehicle.
Couldn't find that VIN. Check the digits and try again.
moderate Owners of the 2007 Mazda Mazda6 have filed 3 NHTSA complaints about the lighting at roughly $250 to repair (U.S. federal records, as of August 2026). Source: NHTSA Office of Defects Investigation. See lighting across all vehicles →
| Model year | lighting complaints |
|---|---|
| 2005 Mazda6 | 6 |
| 2006 Mazda6 | 7 |
| 2007 Mazda6 (this page) | 3 |
| 2009 Mazda6 | 11 |
| 2010 Mazda6 | 19 |
| 2011 Mazda6 | 7 |
Of the 3 lighting complaints filed for the 2007 Mazda Mazda6, here's the actual mileage breakdown — failures cluster heaviest at 150,000+ mi.
Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted. Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits and driving conditions shift the curve as much as mileage alone.
Of the 9 model years of Mazda Mazda6 we track for lighting problems, this one has the fewest owner complaints on file (3).
No new NHTSA lighting complaint has been filed on this vehicle in over 5 years — the issue may be aging out of the active population.
Decreased lighting visibility may result in a vehicle crash.
The manufacturer has issued service bulletins covering lighting on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will t
full bulletin at NHTSA ↗Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will t
full bulletin at NHTSA ↗Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear incertain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will ty
full bulletin at NHTSA ↗When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy.
full bulletin at NHTSA ↗Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limited Warranty term.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
While the car is stationary,and when car is in motion interior lights come on and go off whenever it decides to, wheather it's day or night.
It's a documented issue but not catastrophic. 3 complaints have been filed. Repairs average $250 and most owners catch it before it causes a breakdown.
Based on the 3 complaints filed, lighting issues most often appear around 206,990 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
Independent shops typically charge around $250 for lighting repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Yes — 1 active recall(s) cover lighting issues on this vehicle. Recall fixes are always free regardless of mileage or warranty status. Use the VIN decoder at the top of the page to check if your specific vehicle is affected.