Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will t
full bulletin at NHTSA ↗2011 Mazda Mazda6 lighting problems
moderate Owners of the 2011 Mazda Mazda6 have filed 7 NHTSA complaints about the lighting at roughly $250 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See lighting across all vehicles →
| Model year | lighting complaints |
|---|---|
| 2007 Mazda6 | 3 |
| 2009 Mazda6 | 11 |
| 2010 Mazda6 | 19 |
| 2011 Mazda6 (this page) | 7 |
| 2012 Mazda6 | 21 |
| 2013 Mazda6 | 4 |
| 2014 Mazda6 | 3 |
No new NHTSA lighting complaint has been filed on this vehicle in over 8 years — the issue may be aging out of the active population.
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering lighting on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear in certain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will t
full bulletin at NHTSA ↗Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between the inside and the outside of the light housing. It is normal for very small water drops to appear incertain locations on the light units where the air is stagnant (condensation), making the lens look whitish (fog). This happens mostly in the corners and narrow spaces, and will ty
full bulletin at NHTSA ↗When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No. 2 (C) socket covers have not been correctly installed or are missing due to improper prior repairs (i.e., customer replacing the headlamp bulbs or body shop not transferring them when replacing the headlamp unit(s) due to a collision). Any damage caused by missing socket covers, HID module seal (D), or missing bumper brackets (E) is not covered by warranty policy.
full bulletin at NHTSA ↗Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limited Warranty term.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 1 most recent
Takata recall :I have a Mazda 6 2011 2.5v and the driver side low beam light goes out every single night I drive and I have to tap it really hard to bring it back on and I saw thousands of comments regarding this issue from Mazda 6 2011-2013 owners in social media
Common questions
How serious is the lighting problem on the 2011 Mazda Mazda6?
It's a documented issue but not catastrophic. 7 complaints have been filed. Repairs average $250 and most owners catch it before it causes a breakdown.
At what mileage does the lighting typically fail?
Based on the 7 complaints filed, lighting issues most often appear around 69,400 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $250 for lighting repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to lighting?
No active recalls currently cover lighting issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.