Some 2017 Fusion and MKZ vehicles built on or before 18-Feb-2017 and Continental vehicles may exhibit front windows that fail to open or close completely, bounce back, and/or have a complete loss of the one-touch feature. Reprogram the driver door module (DDM) and/or the passenger door module (PDM) to the latest calibration using IDS version 106.02 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. After programming perform the IDS power window initialization procedure. Access to this IDS learn procedure is available under Toolbox/Body/Power Window Initializ
full bulletin at NHTSA ↗2017 Ford Fusion visibility problems
moderate Owners of the 2017 Ford Fusion have filed 6 NHTSA complaints about the visibility at roughly $350 to repair (U.S. federal records, as of September 2026). Source: NHTSA Office of Defects Investigation. See visibility across all vehicles →
Complaints
6
Recalls
0
Avg fix
$350
| Model year | visibility complaints |
|---|---|
| 2013 Fusion | 20 |
| 2014 Fusion | 19 |
| 2015 Fusion | 14 |
| 2016 Fusion | 13 |
| 2017 Fusion (this page) | 6 |
| 2019 Fusion | 3 |
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering visibility on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
full bulletin at NHTSA ↗Some 2017 Fusion and MKZ vehicles built on 01-Nov-2016 and through 15-Mar-2017 may exhibit front windows that fail to open or close completely, bounce back, and/or have a complete loss of the one-touch feature. Reprogram the driver door module (DDM) and/or the passenger door module (PDM) to the latest calibration using IDS version 104.04 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com. After programming perform the IDS power window initialization procedure. Access to this IDS learn procedure is available under Toolbox/Body/Power Window Initialization. For
full bulletin at NHTSA ↗Some 2017 MKZ and Fusion vehicle built on or before 30-Oct-2016, and Continental vehicles may exhibit window bounce back when using the one-touch feature and/or a loss of window one-touch up functionality. Perform the Integrated Diagnostic System (IDS) power door window initialization procedure. The learn procedure is available on IDS software version 104.02 or later. Access to this IDS learn procedure is available under Toolbox / Body / Power Window Initialization. For claiming, use causal part 14B291 and applicable labor operations in section 10 of the service labor time standards (SLTS) manual. No additional repairs should be attempted if this does not resolve the concern. Engineering is
full bulletin at NHTSA ↗SOME 2017 MKZ, FUSION, AND CONTINENTAL VEHICLES MAY EXHIBIT WINDOW BOUNCE BACK WHEN USING THE ONE-TOUCH FEATURE AND/OR A LOSS OF WINDOW ONE-TOUCH UP FUNCTIONALITY. PERFORM THE INTEGRATED DIAGNOSTIC SYSTEM (IDS) POWER DOOR WINDOW INITIALIZATION PROCEDURE. THE LEARN PROCEDURE IS AVAILABLE ON IDS SOFTWARE VERSION 104.02 OR LATER. ACCESS TO THIS IDS LEARN PROCEDURE IS AVAILABLE UNDER TOOLBOX / BODY / POWER WINDOW INITIALIZATION. FOR CLAIMING, USE CAUSAL PART 14B291 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL. NO ADDITIONAL REPAIRS SHOULD BE ATTEMPTED IF THIS DOES NOT RESOLVE THE CONCERN. ENGINEERING IS AWARE AND IS CURRENTLY INVESTIGATING. MONI
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 0 most recent
Had visibility trouble with your 2017 Ford Fusion?
File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.
Common questions
How serious is the visibility problem on the 2017 Ford Fusion?
It's a documented issue but not catastrophic. 6 complaints have been filed. Repairs average $350 and most owners catch it before it causes a breakdown.
At what mileage does the visibility typically fail?
Based on the 6 complaints filed, visibility issues most often appear around 34,280 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $350 for visibility repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to visibility?
No active recalls currently cover visibility issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.
Related
Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA)
public records database. Verify the raw federal record at
nhtsa.gov/vehicle/2017/Ford/Fusion.
Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are
independent-shop national averages and may differ in your area. Some links on this page are affiliate links.