ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
full bulletin at NHTSA ↗2011 Chrysler 300 engine problems
severe Owners of the 2011 Chrysler 300 have filed 9 NHTSA complaints about the engine at roughly $3,100 to repair (U.S. federal records, as of July 2026). Source: NHTSA Office of Defects Investigation. See engine across all vehicles →
Complaints
9
Recalls
0
Avg fix
$3,100
| Model year | engine complaints |
|---|---|
| 2007 300 | 60 |
| 2008 300 | 49 |
| 2009 300 | 4 |
| 2010 300 | 11 |
| 2011 300 (this page) | 9 |
| 2012 300 | 19 |
| 2013 300 | 18 |
| 2014 300 | 15 |
| 2015 300 | 3 |
1crash
When does it fail?
Of the 9 engine complaints filed for the 2011 Chrysler 300, here's the actual mileage breakdown — failures cluster heaviest at 50,000-75,000 mi.
0-25k
25-50k
50-75k
75-100k
100-125k
125-150k
150k+
Each bar shows the share of total complaints filed at that mileage range. Peak failure window highlighted. Some owners report problems earlier; some make it well past 150,000 miles symptom-free. Maintenance habits and driving conditions shift the curve as much as mileage alone.
What stands out
No new NHTSA engine complaint has been filed on this vehicle in over 11 years — the issue may be aging out of the active population.
Is there a fix? Manufacturer service bulletins
The manufacturer has issued service bulletins covering engine on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
full bulletin at NHTSA ↗ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
full bulletin at NHTSA ↗If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
full bulletin at NHTSA ↗Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
What owners are reporting 1 most recent
Tl* the contact owns a 2011 Chrysler 300. The contact stated that while driving approximately 35 MPH, the engine stalled. As a result, the contact crashed into the base of a light pole. A police report was not filed and no injuries were reported. The vehicle was not diagnosed or repaired. The VIN was included in NHTSA campaign number: 14v634000 (electrical system). The manufacturer was not made…
Had engine trouble with your 2011 Chrysler 300?
File a complaint with NHTSA → It's free, official, and how every report above got here — owner filings are the federal safety record this page is built on.
Common questions
How serious is the engine problem on the 2011 Chrysler 300?
It's a meaningful issue. 9 complaints have been filed and the failure mode causes operational problems for owners. Repairs average $3,100.
At what mileage does the engine typically fail?
Based on the 9 complaints filed, engine issues most often appear around 65,512 miles. Some report problems earlier; some make it well past 150,000 with no symptoms. Maintenance habits matter — vehicles that received timely fluid services and were not regularly overworked tend to last longer.
What does it cost to fix?
Independent shops typically charge around $3,100 for engine repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Are there any recalls related to engine?
No active recalls currently cover engine issues on this vehicle. The complaints filed represent owner-reported failures that haven't risen to the level of a manufacturer-issued recall — but they're still worth knowing about before you buy or budget for repairs.
Related
Complaint and recall data sourced from the National Highway Traffic Safety Administration (NHTSA)
public records database. Verify the raw federal record at
nhtsa.gov/vehicle/2011/Chrysler/300.
Severity ratings are derived from reported crashes, fires, injuries, and fatalities. Repair cost estimates are
independent-shop national averages and may differ in your area. Some links on this page are affiliate links.