General Motors LLC (GM) is recalling certain 2015-2016 GMC Canyon and Chevrolet Colorado, and 2016 Chevrolet Volt vehicles
An improperly inflated air bag increases the risk of injury in a crash.
Free. Instant. No signup. Pulls recalls and complaints for your exact vehicle.
Couldn't find that VIN. Check the digits and try again.
severe Owners of the 2016 Chevrolet Colorado have filed 7 NHTSA complaints about the airbags at roughly $1,100 to repair (U.S. federal records, as of September 2026). Source: NHTSA Office of Defects Investigation. See airbags across all vehicles →
| Model year | airbags complaints |
|---|---|
| 2012 Colorado | 9 |
| 2015 Colorado | 8 |
| 2016 Colorado (this page) | 7 |
| 2017 Colorado | 5 |
| 2018 Colorado | 5 |
| 2019 Colorado | 3 |
All 2 active airbags recalls on this vehicle land at critical or severe — none classified moderate.
An improperly inflated air bag increases the risk of injury in a crash.
An improperly inflated air bag increases the risk of injury.
The manufacturer has issued service bulletins covering airbags on this vehicle — documented repair instructions, service campaigns, or warranty extensions sent to dealers. A TSB isn't a recall (it's not a free safety remedy), but it's the manufacturer acknowledging the issue and how to fix it.
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system that is being used. The Chassis Control Module can be sensitive to a variety of trailer wiring issues. The technician will need to make a trailer tester using Electric Trailer Brake Magnets and 7-way trailer connector to determine if it is a vehicle or trailer issue. If the concern i
full bulletin at NHTSA ↗This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicle that may have a "Check Trailer Wiring" or "Service Trailer Brake System? message on the Driver Information Center when a trailer is connected to the vehicle. Diagnostic Trouble Code C1114 set in the Chassis Control Module. Chassis Control Module has to determine the type of trailer brake system that is being used. The Chassis Control Module can be sensitive to a variety of trailer wiring issues. The technician will need to make a trailer tester using Electric Trailer Brake Magnets and 7-way trailer connector to determine if it is a vehicle or trailer issue. If the concern i
full bulletin at NHTSA ↗This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
full bulletin at NHTSA ↗This Preliminary Information communication provides information to the technician that vehicles may have an Antilock Braking System or Malfunction Indicator Lamp illuminated. Also Low Brake Fluid lamp on with the master cylinder fluid level is full or a Service Trailer Brake message on the Driver Information Center. Technician may find codes C0035, C0040, C0045, C0050, C0055, C0267, U0121, U0415 or U0420. Technician will need to inspect the Electronic Brake Control Module connector for water intrusion or corrosion on the terminals. If either is found, replace the EBCM and replace the affected terminals. Also remove the tape from the conduit leading to G400 between the main harness and the gr
full bulletin at NHTSA ↗This technical bulletin provides a procedure to program the SDM and replace the airbags and pretensioners if deployed.
full bulletin at NHTSA ↗Source: NHTSA manufacturer communications. Bring the bulletin number to your dealer or shop.
It's a meaningful issue. 7 complaints have been filed and the failure mode causes operational problems for owners. Repairs average $1,100.
Mileage data is limited for this issue. Owners report failures across a wide range, suggesting cause is more about driving conditions and maintenance than mileage alone.
Independent shops typically charge around $1,100 for airbags repairs on this vehicle. Dealer pricing tends to run 20-40% higher. The exact figure depends on the specific failure mode, parts availability, and your local labor rates. If you're outside factory warranty, an extended service contract often covers this category.
Yes — 2 active recall(s) cover airbags issues on this vehicle. Recall fixes are always free regardless of mileage or warranty status. Use the VIN decoder at the top of the page to check if your specific vehicle is affected.